Много «ошибки ввода / вывода» после подключения Samsung Galaxy S2 через USB

9

Я пытаюсь подключить свой Samsung Galaxy S2 (GT-9100, Android 2.3.4, I9100XXKI1) к моей Linux-системе (Ubuntu 11.10 oneiric).

Я использую режим USB-накопителя (Настройки ➔ Беспроводной и сетевой ➔ Утилиты USB).

Устройство распознается, и в нем /devсоздаются два узла устройства .

В системном журнале я вижу этот вывод:

sd 9:0:0:1: [sdh] 62325760 512-byte logical blocks: (31.9 GB/29.7 GiB)
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 c8 00 00 08 00
end_request: I/O error, dev sdh, sector 1224
quiet_error: 98 callbacks suppressed
Buffer I/O error on device sdh, logical block 153
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
Buffer I/O error on device sdh, logical block 146
Buffer I/O error on device sdh, logical block 147
Buffer I/O error on device sdh, logical block 148
Buffer I/O error on device sdh, logical block 149
Buffer I/O error on device sdh, logical block 150
Buffer I/O error on device sdh, logical block 151
Buffer I/O error on device sdh, logical block 152
Buffer I/O error on device sdh, logical block 153
Buffer I/O error on device sdh, logical block 154
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:0: [sdg] 24133632 512-byte logical blocks: (12.3 GB/11.5 GiB)
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:0: [sdg] Media Changed
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Unit Attention [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 10 00
end_request: I/O error, dev sdg, sector 32
 sdg:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:0: [sdg] Media Changed
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Unit Attention [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 48 00
end_request: I/O error, dev sdg, sector 32
 sdg:
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
quiet_error: 56 callbacks suppressed
Buffer I/O error on device sdh, logical block 146
Buffer I/O error on device sdh, logical block 147
Buffer I/O error on device sdh, logical block 148
Buffer I/O error on device sdh, logical block 149
Buffer I/O error on device sdh, logical block 150
Buffer I/O error on device sdh, logical block 151
Buffer I/O error on device sdh, logical block 152
Buffer I/O error on device sdh, logical block 153
Buffer I/O error on device sdh, logical block 154
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 01 a8 00 00 08 00
end_request: I/O error, dev sdg, sector 424
Buffer I/O error on device sdg, logical block 53
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 02 00 00 00 08 00
end_request: I/O error, dev sdg, sector 512
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 00 20 00 00 08 00
end_request: I/O error, dev sdg, sector 32
sd 9:0:0:0: [sdg] Device not ready
sd 9:0:0:0: [sdg]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:0: [sdg]  Sense Key : Not Ready [current] 
sd 9:0:0:0: [sdg]  Add. Sense: Medium not present
sd 9:0:0:0: [sdg] CDB: Read(10): 28 00 00 00 10 00 00 00 08 00
end_request: I/O error, dev sdg, sector 4096
sdg: detected capacity change from 12356419584 to 0
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Media Changed
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Unit Attention [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Power on, reset, or bus device reset occurred
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
 sdh:
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
usb 1-1.5: reset high speed USB device number 10 using ehci_hcd
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 48 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 04 90 00 00 08 00
end_request: I/O error, dev sdh, sector 1168
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 00 18 00 00 08 00
end_request: I/O error, dev sdh, sector 24
sd 9:0:0:1: [sdh] Device not ready
sd 9:0:0:1: [sdh]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 9:0:0:1: [sdh]  Sense Key : Not Ready [current] 
sd 9:0:0:1: [sdh]  Add. Sense: Medium not present
sd 9:0:0:1: [sdh] CDB: Read(10): 28 20 00 00 00 18 00 00 08 00
end_request: I/O error, dev sdh, sector 24

Когда я пытаюсь перечислить корневую папку, я получаю:

ls: cannot access /media/3CB1-07D3/Samsung: Input/output error
ls: cannot access /media/3CB1-07D3/LOST.DIR: Input/output error
ls: cannot access /media/3CB1-07D3/external_sd: Input/output error
ls: cannot access /media/3CB1-07D3/usbStorage: Input/output error
...

Я попытался сбросить режим USB-соединения с помощью PhoneUtil, но это не помогло. Я пытался вручную смонтировать телефон с тем же результатом.

Затем я попытался включить отладку по USB . В этом случае системный журнал говорит:

usb 1-1.5: new high speed USB device number 11 using ehci_hcd
scsi10 : usb-storage 1-1.5:1.0
Jan 11 10:24:23 host mtp-probe: checking bus 1, device 11: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5"
Jan 11 10:24:23 host mtp-probe: bus: 1, device: 11 was not an MTP device
cdc_acm 1-1.5:1.1: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
Jan 11 10:24:24 host modem-manager[1288]: <info>  (ttyACM0) opening serial port...
scsi 10:0:0:0: Direct-Access     Android    UMS Composite    00 PQ: 0 ANSI: 2
scsi 10:0:0:1: Direct-Access     Android    UMS Composite    00 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg7 type 0
sd 10:0:0:1: Attached scsi generic sg8 type 0
sd 10:0:0:0: [sdg] Attached SCSI removable disk
sd 10:0:0:1: [sdh] Attached SCSI removable disk

При попытке смонтировать /dev/sdgя получаюmount: no medium found on /dev/sdh

Я смутно помню, что когда-то это работало в режиме USB-накопителя. А пока я установил обновление прошивки. Есть идеи, что я могу попробовать дальше?

Несвязанные вопросы:

samsung-galaxy-s-2  usb  linux 
— Аарон Дигулла
источник

Ответы:

1

Ваша Ubuntu очень устарела. 12.03 12.10. 13,04. 13.10 14.04 - все более новые версии Ubuntu.Use 14.04 или более новые, когда это возможно

Поскольку 13 проблем с моей S2 SDCard практически не существует

— user42276
источник
1
У меня больше нет телефона, но я помню, что с 13.xx года USB-соединение работало большую часть времени. Конечно, теперь у меня есть S4 и новые проблемы (поддержка MTP ;-)
— Aaron Digulla
@AaronDigulla Включить UMS (я думаю, универсальное запоминающее устройство) в хранилище настроек. Я включил это, и он работает отлично (но я не знаю, почему я получаю опцию подключения USB-накопителя на Android), но когда включена отладка по USB (я обращаюсь к тросу), я получаю Ошибка MTP, и я должен найти его похороненным под окнами и закрыть его, чтобы получить доступ к памяти телефона на ПК
— user42276
@AaronDigulla HAHHAAHA LOL Я только что увидел, что это 2 года!
— user42276
Мне нужно рутировать мое устройство для UMS. Я не
— настолько
@AaronDigulla его стоит
— рутировать
0

Я почти не помню подобных симптомов, вызванных неисправной SD-картой, но это не объясняет проблемы с обоими виртуальными устройствами. Вы пробовали другой кабель и другой USB-порт на стороне компьютера? Просто чтобы убедиться, что проблема не вызвана плохим кабельным соединением ...

— мо»
источник
2
Упс, следовало бы сначала проверить дату вопросов ... :-D
— mo '
0

Надеюсь, вы включаете режим USB-передачи в опциях S2 USB. Так у меня работает нормально. Дополнительные настройки> Утилиты USB> Запоминающее устройство.

— user53872
источник
НЕ ЕСЛИ отладка usb из-за сообщения об ошибке mtp, блокирующего вас от нажатия открытой телефонной
— книги
Используя наш сайт, вы подтверждаете, что прочитали и поняли нашу Политику в отношении файлов cookie и Политику конфиденциальности.
Licensed under cc by-sa 3.0 with attribution required.